{"title":"ALPINESTARS - MX Helmets","description":null,"products":[{"product_id":"supertech-s-m10-helmet-as-8300119-1188","title":"Supertech S-M10 Helmet","description":"\u003cul\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003cp\u003eThe result of over five years of intensive study, development and testing; Alpinestars Supertech M10 motocross helmet made its race debut at the Anaheim Supercross, in January 2018.\u003c\/p\u003e\n\u003cp\u003eAt the outset of the MX helmet project, Alpinestars product philosophy was applied and a set of specific objectives set:\u003c\/p\u003e\n\u003cp\u003eCreate the most advanced, protective and performance enhancing helmet possible.\u003c\/p\u003e\n\u003cp\u003ePrimary objective: protection – to create the most high-performance protection possible.\u003c\/p\u003e\n\u003cp\u003eSecondary objective: to give excellent ventilation, comfort and reduced weight.\u003c\/p\u003e\n\u003cp\u003eAlpinestars approach to the creation of the advanced technology in the Supertech M10 draws on its depth of experience from over half a decade of world class innovation across the spectrum of motorsports and especially, its deep-rooted commitment to motocross. As with all other categories of technology that Alpinestars has mastered, bringing a new, highly complex, product to fruition requires specialist experience and know-how and a project plan led by the best brains in protection development.\u003c\/p\u003e\n\u003cp\u003eHence Alpinestars Helmet Development Department was created and given the brief to research and develop the most protective, most comfortable and lightest possible motocross helmet. The goal was to allow riders to push the limits of performance, benefiting from confidence inspiring safety technology, reduced weight distribution to minimize muscular effort in the neck, shoulders and back and improved physiological and cognitive performance with a supremely well-fitting and well-ventilated construction, optimizing comfort while riding.\u003c\/p\u003e\n\u003cp\u003eThe design is coherent to Alpinestars philosophy and shares distinctive themes with other products in the portfolio; a smooth, attractive, profile which is streamlined and free of any external channels and features that might act as a load point in an impact, or compromise the overall integrity of the construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column. The aperture is designed to accommodate a wide variety of goggles and the air vents in the shell are located to maximize ventilation efficiency.\u003c\/p\u003e\n\u003cp\u003eThe Supertech M10 shell has been profiled with performance as a priority and with a design style that identifies the profile of the helmet and its sculpted surface as uniquely ‘Alpinestars’.\u003c\/p\u003e\n\u003cp\u003eAnother key feature is the M10 shell sizing solution; each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONSTRUCTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon shell construction utilizes a highly advanced moulding technology with a multi-composite combination:\u003c\/li\u003e\n\u003cli\u003e3K, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell.\u003c\/li\u003e\n\u003cli\u003eUD carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy.\u003c\/li\u003e\n\u003cli\u003eAramid fibre layer which provides critical penetration protection.\u003c\/li\u003e\n\u003cli\u003eThis three-layer composite combination is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management.\u003c\/li\u003e\n\u003cli\u003eThe combination of material layers gives improved energy management: limited outer shell deflection making the energy spread wider and better absorbed by the EPS liner.\u003c\/li\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the M10 construction results in extremely effective impact protection.\u003c\/li\u003e\n\u003cli\u003eWith a fully equipped helmet testing facility, within Alpinestars Racing Development Centre, an exhaustive impact research program has resulted in the Supertech returning linear and oblique impact performance which far improves upon current helmet regulation standard limits.\u003c\/li\u003e\n\u003cli\u003eFor direct, linear, impact by an average magnitude of 41% and for rotational acceleration, oblique, impact performance by an average of 48%.\u003c\/li\u003e\n\u003cli\u003eM10 in four anatomical shell sizes.\u003c\/li\u003e\n\u003cli\u003eThe Supertech M10 shell construction is optimized to offer best fit across the range of four size options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eShell sizes are manufactured in small, medium, large and extra-large to ensure that riders have the correct fit which not only improves comfort but, most importantly, the effectiveness of the helmet in an impact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Supertech M10 liner construction combines with the shell to offer highly efficient impact energy management.\u003c\/li\u003e\n\u003cli\u003eFormed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up impact forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit.\u003c\/li\u003e\n\u003cli\u003eThe energy absorption performance of the M10 is substantially improved by a four-section construction that allows for specific densities of polymer to be prepared for different zones around the helmet lining.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot only is energy performance improved but also fit and comfort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA-HEAD ADJUSTMENT SYSTEM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head fitting height and angle adjustment system.\u003c\/li\u003e\n\u003cli\u003eThe Supertech M10 incorporates a patented system to allow the helmet to be tuned exactly to the riders preference for the height and angle at which the helmet sits on the head.\u003c\/li\u003e\n\u003cli\u003eThis unique technology allows for an ultra-specific set-up that can be adapted for the type of riding and the rider’s preference.\u003c\/li\u003e\n\u003cli\u003eWith a micro-adjustable pad that is connected to the helmet inner shell, it is possible to raise or lower the helmet fit and also, to tilt the helmet forward, or backwards.\u003c\/li\u003e\n\u003cli\u003eUnique, patented, visor release system is another key attribute incorporated into the design of the Supertech M10.\u003c\/li\u003e\n\u003cli\u003eVisor release is a key part of overall protection performance in the helmet and a major influence on the distinctive, flush, design of the outer shell profile.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has developed a unique visor release system which, while ensuring the mounting is held securely in place for riding over the most extreme terrain and any track conditions, provides exactly the right level of resistance to ensure the visor detaches from the helmet shell if it is subjected to a significant impact, no matter what the angle.\u003c\/li\u003e\n\u003cli\u003eThe M10 visor release mechanism is conceived to avoid the inherent weaknesses in other types of anchoring systems.\u003c\/li\u003e\n\u003cli\u003eMaintaining shell integrity is vital for safety and with the possibility of multi-directional forces impacting on the visor, separation at the critical point of loading reduces potentially damaging leverage and rotational accelerations that refer injury to the rider’s neck and spine.\u003c\/li\u003e\n\u003cli\u003eAlong with the ERS padding removal, ‘Eject’ allows for emergency removal of the helmet, without putting load on the rider’s spine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: Reduced by design while allowing the Supertech M10protection to be class-leading.\u003c\/li\u003e\n\u003cli\u003eWeight is both a factor in riding performance and safety in a helmet and to ensure the M-10 offers the ultimate in weight saving performance enhancement, the material selection, preparation and construction of the helmet has been rigorously analysed for weight to strength and energy absorption properties and a strict analysis of all the components used in the Supertech finishing.\u003c\/li\u003e\n\u003cli\u003eWeight of M-10 is 1260g for size Medium (ECE) For DOT: 1370g for size Medium\u003c\/li\u003e\n\u003cli\u003eVentilation is a key feature of the Supertech M10.\u003c\/li\u003e\n\u003cli\u003eHeat mapping tests have resulted in specifically designed ducting which produces a positive flow into the helmet over and around the rider’s head, improving comfort while riding and reducing the on-set of heat stress in extreme conditions.\u003c\/li\u003e\n\u003cli\u003eThe visor design of the M10 is also an integral part of the ventilation system as it is profiled to direct airflow, acting as a channel to concentrate and smooth the flow into the shell.\u003c\/li\u003e\n\u003cli\u003eThe Supertech liner design is formed to optimize airflow channelling around the rider’s head before being extracted from the M10 through rear exhaust vents to ensure positive pressure is maintained with constant airflow while riding.\u003c\/li\u003e\n\u003cli\u003eHydration system compatibility.\u003c\/li\u003e\n\u003cli\u003eThe Supertech helmet lining design includes canals which allow a tube to be incorporated on either side of the shell.\u003c\/li\u003e\n\u003cli\u003eThis is a feature extensively tested by Alpinestars rally raid and enduro riders enabling convenient fitting and connection to a hydration system.\u003c\/li\u003e\n\u003cli\u003eInterior lining comfort.\u003c\/li\u003e\n\u003cli\u003eRemovable liner cover is washable and features a cool-max fabric interior and anti-bacterial talent yarn for long-lasting freshness and quick-dry performance between riding sessions.\u003c\/li\u003e\n\u003cli\u003eChin-Strap: Wider than certification requirement: 26 mm for comfort and produces with a woven poly yarn to give a soft ‘hand’ feel and connects securely with a double D-ring.\u003c\/li\u003e\n\u003cli\u003eHelmet features TPE coating washable surfaces to improve maintenance and increase durability.\u003c\/li\u003e\n\u003cli\u003eAccessories included with the Supertech M10.\u003c\/li\u003e\n\u003cli\u003eSpare Visor\u003c\/li\u003e\n\u003cli\u003eRacing Helmet Bag\u003c\/li\u003e\n\u003cli\u003eAdditional cheek pad set offering increased thickness of +5mm, for tighter fit adjustment – available separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePROTECTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConforming to both DOT certification and ECE homologation, the M10 is certified for use worldwide.\u003c\/li\u003e\n\u003cli\u003eThe DOT 218 standard prescribes specific impact penetration protection over the crown of the helmet area and hence, for the US and Canada markets, the Supertech M10 will feature technology that substantially exceeded the minimum safety requirements.\u003c\/li\u003e\n\u003cli\u003eCollarbone protection is an important design feature of the Supertech helmet shell base profile.\u003c\/li\u003e\n\u003cli\u003eThe base of the M10 has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (Clavicle).\u003c\/li\u003e\n\u003cli\u003eAlso, incorporated into the area of the base pad, where it sits over the rider’s collarbone, is an energy absorption pad; a more flexible compound rubber section which allows deflection when it contacts the Clavicle.\u003c\/li\u003e\n\u003cli\u003eThe Supertech M10 chin-bar is formed with polypropylene which, by allowing for a degree of lateral deflection, further improves impact protection for the collarbones.\u003c\/li\u003e\n\u003cli\u003ePost-crash protection mechanisms are also a key feature of the Supertech design, allowing rapid and safe intervention if the rider has suffered a major impact.\u003c\/li\u003e\n\u003cli\u003eMulti-Directional Impact Protection System: MIPS.\u003c\/li\u003e\n\u003cli\u003eMIPS is incorporated into the Supertech M-10 to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain.\u003c\/li\u003e\n\u003cli\u003eA low friction ‘slip’ layer is incorporated into the Supertech M10 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell.\u003c\/li\u003e\n\u003cli\u003eWhen energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis mitigates the causes of brain injuries, such as concussion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmergency Release System (ERS).\u003c\/li\u003e\n\u003cli\u003eThe side cheek padding of the Supertech can be extracted efficiently and safely, while the helmet is still on the rider’s head, to allow ease of removal by trackside support and medical staff.\u003c\/li\u003e\n\u003cli\u003eThe Supertech M10is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"accordion-main\"\u003e \u003c\/div\u003e\n\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XXL","offer_id":50550429188398,"sku":"AS-8300119-1188-XXL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300319-1188.jpg?v=1749590429"},{"product_id":"supertech-s-m10-helmet-as-8300123-1188","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":50550429352238,"sku":"AS-8300123-1188-XS","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"S","offer_id":50550429385006,"sku":"AS-8300123-1188-S","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":50550429417774,"sku":"AS-8300123-1188-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550429450542,"sku":"AS-8300123-1188-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550429483310,"sku":"AS-8300123-1188-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300123-1188.jpg?v=1773779196"},{"product_id":"supertech-s-m10-solid-white-as-8300123-2180","title":"Supertech S-M10 Solid White","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51855991472430,"sku":"AS-8300123-2180-XS","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"S","offer_id":50550429876526,"sku":"AS-8300123-2180-S","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":50550429909294,"sku":"AS-8300123-2180-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550429942062,"sku":"AS-8300123-2180-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550429974830,"sku":"AS-8300123-2180-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300123-2180.jpg?v=1773779197"},{"product_id":"supertech-s-m10-helmet-as-8300223-1902","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":50550430040366,"sku":"AS-8300223-1902-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":50550430073134,"sku":"AS-8300223-1902-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550430105902,"sku":"AS-8300223-1902-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550430138670,"sku":"AS-8300223-1902-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300223-1902.jpg?v=1773779199"},{"product_id":"supertech-s-m10-tld-edition-as-8300325-7156","title":"Supertech S-M10 TLD Edition","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"M","offer_id":50550430400814,"sku":"AS-8300325-7156-M","price":1299.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550430433582,"sku":"AS-8300325-7156-L","price":1299.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550430466350,"sku":"AS-8300325-7156-XL","price":1299.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300325-7156.jpg?v=1773779200"},{"product_id":"supertech-s-m10-deegan-as-8300525-433","title":"Supertech S-M10 Deegan","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":50550430925102,"sku":"AS-8300525-433-S","price":1299.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":50550430957870,"sku":"AS-8300525-433-M","price":1299.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550430990638,"sku":"AS-8300525-433-L","price":1299.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300525-433.jpg?v=1749590475"},{"product_id":"supertech-s-m10-helmet-as-8300923-1310","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":50550431154478,"sku":"AS-8300923-1310-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":50550431187246,"sku":"AS-8300923-1310-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550431220014,"sku":"AS-8300923-1310-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550431252782,"sku":"AS-8300923-1310-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300923-1310.jpg?v=1749590485"},{"product_id":"supertech-s-m10-helmet-as-8300923-1954","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":50550431285550,"sku":"AS-8300923-1954-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":50550431318318,"sku":"AS-8300923-1954-M","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":50550431351086,"sku":"AS-8300923-1954-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550431383854,"sku":"AS-8300923-1954-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300923-1954.jpg?v=1749590493"},{"product_id":"supertech-s-m10-as-8300923-3003","title":"Supertech S-M10","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":50550431449390,"sku":"AS-8300923-3003-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":50550431482158,"sku":"AS-8300923-3003-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550431514926,"sku":"AS-8300923-3003-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550431547694,"sku":"AS-8300923-3003-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300923-3003.jpg?v=1749590501"},{"product_id":"supertech-s-m10-as-8301123-5938","title":"Supertech S-M10","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":50550431580462,"sku":"AS-8301123-5938-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":50550431613230,"sku":"AS-8301123-5938-M","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":50550431645998,"sku":"AS-8301123-5938-L","price":1199.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8301123-5938.jpg?v=1749590510"},{"product_id":"s-m5-solid-helmet-matte-black-as-8303023-110","title":"S-M5 Solid Helmet Matte Black","description":"\u003cp\u003eThe SM5 helmet has been designed to provide MX riders with a helmet that is safe and purposefully designed to deliver optimal protection and comfort. The lightweight SM5 helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight while the five density EPS liner ensures the correct density in the correct area for enhanced impact absorption.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• An engineered raised area with padding effectively reduces the forces transmitted to the collarbone and a patented visor release system that ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three anatomical shell sizes, plus three individual EPS inner liner sizes with a combination of inner lining and cheek padding to offer 6 unique sizes and to ensure the best fitment and protection.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Revised the medium, large, XL and 2XL lower shell volume to be around 3% wider to make the helmet easier to put on and take off where the increase in helmet volume has also improved the impact management performance which is now 44% lower than the regular-speed threshold.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• For the new ECE 22.06 standard, the SM5 achieves a 44% better regular-speed impact rating compared to the current 33% figure, as well as a 32% better low-speed, and 31% better high-speed linear impact score than the prevailing standard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The inner and outer surfaces are engineered to minimise the effects of oblique impacts. To help fight and mitigate those rotational impact forces, Alpinestars has designed a proprietary technology by creating a low friction surface on the inner surface of the EPS liner. For the ECE 22.06 standard, which now includes the rotational oblique impact rating, the SM5 scores 70% under the new regulation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Multiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Redesigned chin bars new profile where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone with a new softer EPS liner which extends beyond the helmet shell itself and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Patented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Maximised ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The ECE version of the SM5 helmet weighs 1350 grams for a size medium and 1420 grams for the ECE DOT version with shield.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The visor has been designed to direct air into the ports for enhanced airflow.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The SM5 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":50550434332974,"sku":"AS-8303023-110-XS","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":50550434365742,"sku":"AS-8303023-110-S","price":449.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":50550434398510,"sku":"AS-8303023-110-M","price":449.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":50550434431278,"sku":"AS-8303023-110-L","price":449.9,"currency_code":"NZD","in_stock":false},{"title":"XL","offer_id":50550434464046,"sku":"AS-8303023-110-XL","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":50550434496814,"sku":"AS-8303023-110-XXL","price":449.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8303023-110.jpg?v=1749590588"},{"product_id":"s-m5-solid-helmet-white-gloss-as-8303023-2180","title":"S-M5 Solid Helmet White Gloss","description":"\u003cp\u003eThe SM5 helmet has been designed to provide MX riders with a helmet that is safe and purposefully designed to deliver optimal protection and comfort. The lightweight SM5 helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight while the five density EPS liner ensures the correct density in the correct area for enhanced impact absorption.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• An engineered raised area with padding effectively reduces the forces transmitted to the collarbone and a patented visor release system that ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Lightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in three anatomical shell sizes, plus three individual EPS inner liner sizes with a combination of inner lining and cheek padding to offer 6 unique sizes and to ensure the best fitment and protection.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Revised the medium, large, XL and 2XL lower shell volume to be around 3% wider to make the helmet easier to put on and take off where the increase in helmet volume has also improved the impact management performance which is now 44% lower than the regular-speed threshold.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• For the new ECE 22.06 standard, the SM5 achieves a 44% better regular-speed impact rating compared to the current 33% figure, as well as a 32% better low-speed, and 31% better high-speed linear impact score than the prevailing standard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The inner and outer surfaces are engineered to minimise the effects of oblique impacts. To help fight and mitigate those rotational impact forces, Alpinestars has designed a proprietary technology by creating a low friction surface on the inner surface of the EPS liner. For the ECE 22.06 standard, which now includes the rotational oblique impact rating, the SM5 scores 70% under the new regulation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Multiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Redesigned chin bars new profile where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone with a new softer EPS liner which extends beyond the helmet shell itself and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Patented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Maximised ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The ECE version of the SM5 helmet weighs 1350 grams for a size medium and 1420 grams for the ECE DOT version with shield.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The visor has been designed to direct air into the ports for enhanced airflow.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• The SM5 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":50550434562350,"sku":"AS-8303023-2180-XS","price":449.9,"currency_code":"NZD","in_stock":false},{"title":"S","offer_id":50550434595118,"sku":"AS-8303023-2180-S","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":50550434627886,"sku":"AS-8303023-2180-M","price":449.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":50550434660654,"sku":"AS-8303023-2180-L","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550434693422,"sku":"AS-8303023-2180-XL","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":50550434726190,"sku":"AS-8303023-2180-XXL","price":449.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8303023-2180.jpg?v=1749590596"},{"product_id":"s-m5-solar-flare-helmet-as-8305722-1355","title":"S-M5 Solar Flare Helmet","description":"\u003cp\u003eThe all-new SM5 helmet is the result of more than five years of intensive study, development and testing. We scrutinised every possible aspect to engineer a helmet that is safe and thoughtfully designed to deliver optimal protection and comfort. This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, while the five density EPS liner ensures the correct density in the correct area for enhanced impact absorption. Other key design features include an engineered raised area with padding to effectively reduce the forces transmitted to the collarbone and a patented visor release system that ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in two sizes.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eMultiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption.\u003c\/li\u003e\n\u003cli\u003ePatented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/li\u003e\n\u003cli\u003eMaximised ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.\u003c\/li\u003e\n\u003cli\u003eThe visor has been designed to direct air into the ports for enhanced airflow.\u003c\/li\u003e\n\u003cli\u003eSide shell couple with soft EPS foam prevents damage to collarbone in the event of a crash.\u003c\/li\u003e\n\u003cli\u003eEmergency release system and removable cheek pads permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eRemovable comfort liner with Silverplus® treated anti-bacterial fabrics for excellent moisture wicking, effectively drawing perspiration away from the skin.\u003c\/li\u003e\n\u003cli\u003eAnti-microbial liner is removable and washable.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 26mm and is wider than certification requirements for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings to ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings to ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eA size Medium weighs 1260g (ECE) 1380g (DOT).\u003c\/li\u003e\n\u003cli\u003eThe SM5 helmet conforms to both DOT certification and ECE homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"M","offer_id":50550434758958,"sku":"AS-8305722-1355-M","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":50550434791726,"sku":"AS-8305722-1355-L","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":50550434824494,"sku":"AS-8305722-1355-XL","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":50550434857262,"sku":"AS-8305722-1355-XXL","price":449.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8305822-1355.jpg?v=1749590600"},{"product_id":"s-m5-solar-flare-helmet-as-8305722-1739","title":"S-M5 Solar Flare Helmet","description":"\u003cp\u003eThe all-new SM5 helmet is the result of more than five years of intensive study, development and testing. We scrutinised every possible aspect to engineer a helmet that is safe and thoughtfully designed to deliver optimal protection and comfort. This lightweight helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, while the five density EPS liner ensures the correct density in the correct area for enhanced impact absorption. Other key design features include an engineered raised area with padding to effectively reduce the forces transmitted to the collarbone and a patented visor release system that ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight outer shell is constructed from a technologically advanced impact resistant thermoplastic in two sizes.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eMultiple density inner liner to ensure the correct density in the correct area for enhanced impact absorption.\u003c\/li\u003e\n\u003cli\u003ePatented visor release system ensures the visor is released with the correct pre-determined amount of force, irrespective of the angle of impact.\u003c\/li\u003e\n\u003cli\u003eMaximised ventilation and high levels of heat transfer exchange thanks to multi-air inlets and exhaust ports.\u003c\/li\u003e\n\u003cli\u003eThe visor has been designed to direct air into the ports for enhanced airflow.\u003c\/li\u003e\n\u003cli\u003eSide shell couple with soft EPS foam prevents damage to collarbone in the event of a crash.\u003c\/li\u003e\n\u003cli\u003eEmergency release system and removable cheek pads permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eRemovable comfort liner with Silverplus® treated anti-bacterial fabrics for excellent moisture wicking, effectively drawing perspiration away from the skin.\u003c\/li\u003e\n\u003cli\u003eAnti-microbial liner is removable and washable.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 26mm and is wider than certification requirements for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings to ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings to ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eA size Medium weighs 1260g (ECE) 1380g (DOT).\u003c\/li\u003e\n\u003cli\u003eThe SM5 helmet conforms to both DOT certification and ECE homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XL","offer_id":50550435250478,"sku":"AS-8305722-1739-XL","price":449.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":50550435283246,"sku":"AS-8305722-1739-XXL","price":449.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8305722-1739.jpg?v=1749590610"},{"product_id":"s-m3-helmet-as-8300426-110","title":"S-M3 Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479600660782,"sku":"AS-8300426-110-XS","price":359.9,"currency_code":"NZD","in_stock":false},{"title":"S","offer_id":51479600693550,"sku":"AS-8300426-110-S","price":359.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479600726318,"sku":"AS-8300426-110-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479600759086,"sku":"AS-8300426-110-L","price":359.9,"currency_code":"NZD","in_stock":false},{"title":"XL","offer_id":51479600791854,"sku":"AS-8300426-110-XL","price":359.9,"currency_code":"NZD","in_stock":false},{"title":"XXL","offer_id":51479600824622,"sku":"AS-8300426-110-XXL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300426-110.jpg?v=1773779202"},{"product_id":"s-m3-helmet-as-8300426-2180","title":"S-M3 Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479600922926,"sku":"AS-8300426-2180-XS","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479600955694,"sku":"AS-8300426-2180-S","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479600988462,"sku":"AS-8300426-2180-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479601021230,"sku":"AS-8300426-2180-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479601053998,"sku":"AS-8300426-2180-XL","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":51479601086766,"sku":"AS-8300426-2180-XXL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300426-2180.jpg?v=1773779203"},{"product_id":"supertech-s-m10-monster-as-8300525-433","title":"Supertech S-M10 Monster","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479601119534,"sku":"AS-8300525-433-S","price":1299.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479601152302,"sku":"AS-8300525-433-M","price":1299.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479601185070,"sku":"AS-8300525-433-L","price":1299.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479601217838,"sku":"AS-8300525-433-XL","price":1299.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300525-433_39d7aff0-440d-4442-8355-0f6050e48f0d.jpg?v=1773779205"},{"product_id":"s-m3-radium-helmet-as-8300726-1546","title":"S-M3 Radium Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479601250606,"sku":"AS-8300726-1546-XS","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479601283374,"sku":"AS-8300726-1546-S","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479601316142,"sku":"AS-8300726-1546-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479601348910,"sku":"AS-8300726-1546-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479601381678,"sku":"AS-8300726-1546-XL","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":51479601414446,"sku":"AS-8300726-1546-XXL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300726-1546.jpg?v=1773779206"},{"product_id":"s-m3-radium-helmet-as-8300726-1553","title":"S-M3 Radium Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479601447214,"sku":"AS-8300726-1553-XS","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479601479982,"sku":"AS-8300726-1553-S","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479601512750,"sku":"AS-8300726-1553-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479601545518,"sku":"AS-8300726-1553-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479601578286,"sku":"AS-8300726-1553-XL","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":51855991505198,"sku":"AS-8300726-1553-XXL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300726-1553.jpg?v=1773779207"},{"product_id":"supertech-s-m10-flood-helmet-as-8300923-1310","title":"Supertech S-M10 Flood Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479601774894,"sku":"AS-8300923-1310-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479601807662,"sku":"AS-8300923-1310-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479601840430,"sku":"AS-8300923-1310-L","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"XL","offer_id":51479601873198,"sku":"AS-8300923-1310-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300923-1310_a9aafe14-8f3b-42ee-9237-ecf0621bbc8b.jpg?v=1773779210"},{"product_id":"supertech-s-m10-flood-helmet-as-8300923-1954","title":"Supertech S-M10 Flood Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479601905966,"sku":"AS-8300923-1954-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479601938734,"sku":"AS-8300923-1954-M","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":51479601971502,"sku":"AS-8300923-1954-L","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"XL","offer_id":51479602004270,"sku":"AS-8300923-1954-XL","price":1199.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300923-1954_730c25c9-b448-4531-b90a-2d7eb954b282.jpg?v=1773779211"},{"product_id":"supertech-s-m10-flood-helmet-as-8300923-3003","title":"Supertech S-M10 Flood Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479602037038,"sku":"AS-8300923-3003-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479602069806,"sku":"AS-8300923-3003-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479602102574,"sku":"AS-8300923-3003-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479602135342,"sku":"AS-8300923-3003-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8300923-3003_7434e3b0-fb49-4210-a0c6-9365bf7b51b1.jpg?v=1773779213"},{"product_id":"supertech-s-m10-flood-helmet-as-8300923-7282","title":"Supertech S-M10 Flood Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479602168110,"sku":"AS-8300923-7282-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479602200878,"sku":"AS-8300923-7282-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479602233646,"sku":"AS-8300923-7282-L","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51855991537966,"sku":"AS-8300923-7282-XL","price":1199.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300923-7282.jpg?v=1773779215"},{"product_id":"s-m3-heat-helmet-as-8300926-1949","title":"S-M3 Heat Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51855991570734,"sku":"AS-8300926-1949-XS","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479602266414,"sku":"AS-8300926-1949-S","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479602299182,"sku":"AS-8300926-1949-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479602331950,"sku":"AS-8300926-1949-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479602364718,"sku":"AS-8300926-1949-XL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300926-1949.jpg?v=1773779218"},{"product_id":"s-m3-heat-helmet-as-8300926-2052","title":"S-M3 Heat Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479602397486,"sku":"AS-8300926-2052-XS","price":359.9,"currency_code":"NZD","in_stock":false},{"title":"S","offer_id":51479602430254,"sku":"AS-8300926-2052-S","price":359.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479602463022,"sku":"AS-8300926-2052-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479602495790,"sku":"AS-8300926-2052-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479602528558,"sku":"AS-8300926-2052-XL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300926-2052.jpg?v=1773779222"},{"product_id":"s-m3-heat-helmet-as-8300926-3126","title":"S-M3 Heat Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51855991636270,"sku":"AS-8300926-3126-XS","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479602561326,"sku":"AS-8300926-3126-S","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479602594094,"sku":"AS-8300926-3126-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479602626862,"sku":"AS-8300926-3126-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479602659630,"sku":"AS-8300926-3126-XL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300926-3126.jpg?v=1773779224"},{"product_id":"s-m3-heat-helmet-as-8300926-5011","title":"S-M3 Heat Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51855991669038,"sku":"AS-8300926-5011-XS","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479602692398,"sku":"AS-8300926-5011-S","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479602725166,"sku":"AS-8300926-5011-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479602757934,"sku":"AS-8300926-5011-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479602790702,"sku":"AS-8300926-5011-XL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8300926-5011.jpg?v=1773779227"},{"product_id":"supertech-s-m10-helmet-as-8301123-5938","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNew Eject technology includes the Eject Helmet Removal System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight ECE 1260g and DOT 1360g for a size medium, 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe S-M10 is available in 2 versions ECE R 22.06 and ECE R 22.06\/DOT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479602921774,"sku":"AS-8301123-5938-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479602954542,"sku":"AS-8301123-5938-M","price":1199.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":51479602987310,"sku":"AS-8301123-5938-L","price":1199.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/8301123-5938_fd4dd64e-56fd-4db7-89c4-daac608e3e99.jpg?v=1773779231"},{"product_id":"supertech-s-m10-helmet-as-8301123-7356","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective, and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation, and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003cli\u003eNew eject technology includes the eject helmet removal system.\u003c\/li\u003e\n\u003cli\u003eLightweight ECE 1260g and 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003cli\u003eECE R 22.06\/DOT\u003c\/li\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479603052846,"sku":"AS-8301123-7356-S","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479603085614,"sku":"AS-8301123-7356-M","price":1199.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479603118382,"sku":"AS-8301123-7356-L","price":1199.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8301123-7356.jpg?v=1773779232"},{"product_id":"s-m3-force-helmet-as-8301126-1180","title":"S-M3 Force Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51855991832878,"sku":"AS-8301126-1180-XS","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479603151150,"sku":"AS-8301126-1180-S","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479603183918,"sku":"AS-8301126-1180-M","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479603216686,"sku":"AS-8301126-1180-L","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479603249454,"sku":"AS-8301126-1180-XL","price":359.9,"currency_code":"NZD","in_stock":true},{"title":"XXL","offer_id":51479603282222,"sku":"AS-8301126-1180-XXL","price":359.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8301126-1180.jpg?v=1773779234"},{"product_id":"s-m7-helmet-as-8301326-1180","title":"S-M7 Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479603314990,"sku":"AS-8301326-1180-XS","price":599.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479603347758,"sku":"AS-8301326-1180-S","price":599.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479603380526,"sku":"AS-8301326-1180-M","price":599.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":51479603413294,"sku":"AS-8301326-1180-L","price":599.9,"currency_code":"NZD","in_stock":false},{"title":"XL","offer_id":51479603446062,"sku":"AS-8301326-1180-XL","price":599.9,"currency_code":"NZD","in_stock":false},{"title":"XXL","offer_id":51479603478830,"sku":"AS-8301326-1180-XXL","price":599.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8301326-1180.jpg?v=1773779235"},{"product_id":"s-m7-rise-helmet-as-8301526-1564","title":"S-M7 Rise Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479603511598,"sku":"AS-8301526-1564-XS","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"S","offer_id":51479603544366,"sku":"AS-8301526-1564-S","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479603577134,"sku":"AS-8301526-1564-M","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479603609902,"sku":"AS-8301526-1564-L","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479603642670,"sku":"AS-8301526-1564-XL","price":649.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8301526-1564.jpg?v=1773779238"},{"product_id":"s-m7-core-helmet-as-8301726-3127","title":"S-M7 Core Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479604003118,"sku":"AS-8301726-3127-S","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479604035886,"sku":"AS-8301726-3127-M","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479604068654,"sku":"AS-8301726-3127-L","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479604101422,"sku":"AS-8301726-3127-XL","price":649.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8301726-3127.jpg?v=1773779245"},{"product_id":"s-m7-fuse-helmet-as-8301926-2054","title":"S-M7 Fuse Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479604134190,"sku":"AS-8301926-2054-S","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479604166958,"sku":"AS-8301926-2054-M","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":51479604199726,"sku":"AS-8301926-2054-L","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"XL","offer_id":51479604232494,"sku":"AS-8301926-2054-XL","price":649.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8301926-2054.jpg?v=1773779249"},{"product_id":"s-m7-fuse-helmet-as-8301926-7256","title":"S-M7 Fuse Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479604265262,"sku":"AS-8301926-7256-S","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479604298030,"sku":"AS-8301926-7256-M","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":51479604330798,"sku":"AS-8301926-7256-L","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479604363566,"sku":"AS-8301926-7256-XL","price":649.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8301926-7256.jpg?v=1773779251"},{"product_id":"s-m7-deed-helmet-as-8302326-3139","title":"S-M7 Deed Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479604560174,"sku":"AS-8302326-3139-S","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479604592942,"sku":"AS-8302326-3139-M","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479604625710,"sku":"AS-8302326-3139-L","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479604658478,"sku":"AS-8302326-3139-XL","price":649.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8302326-3139.jpg?v=1773779256"},{"product_id":"s-m7-deed-helmet-as-8302326-3142","title":"S-M7 Deed Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51479604691246,"sku":"AS-8302326-3142-S","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479604724014,"sku":"AS-8302326-3142-M","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"L","offer_id":51479604756782,"sku":"AS-8302326-3142-L","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479604789550,"sku":"AS-8302326-3142-XL","price":649.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8302326-3142.jpg?v=1773779258"},{"product_id":"s-m7-cast-helmet-as-8302526-7254","title":"S-M7 Cast Helmet","description":"\u003cp\u003eThe S-M7 Helmet is engineered for off-road racing and is optimised to offer the perfect blend of superior ventilation and comfort in a lightweight helmet, while its supremely aerodynamic composite shell delivers exceptional impact protection. As well as Alpinestars patented A-Head Fitment and Visor Detaching Systems, the S-M7 is equipped with innovative PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collarbone area.\u003cbr\u003e• Aerodynamic Design: The S-M7’s aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction.\u003cbr\u003e• Energy-Deflecting Design: The helmet’s curved shell is engineered to reduce friction and deflect impact forces away from the head, helping protect the skull, neck and spine in the event of a crash.\u003cbr\u003e• PLASMA Inside: Alpinestars patented PLASMA technology is strategically integrated into the S-M7’s side pads for high performance shock absorption in a critical area, significantly reducing the risk of injuries.\u003cbr\u003e• A-Head Technology: Alpinestars patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head for an optimised performance fit.\u003cbr\u003e• Patented Visor Release: The S-M7’s patented Visor Release System is designed to detach during a crash, reducing the risk of helmet damage or rotational injury.\u003cbr\u003e• The S-M7’s visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction.\u003cbr\u003e• Shell Sizing for Optimal Fit: The S-M7 shell sizing solution ensures each helmet fit size delivers the most anatomical solution for the wide variety of fit needs worldwide, providing 3 different helmet shell sizes and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003cbr\u003e• Hydration System Ready: The helmet incorporates integrated channels on both sides to accommodate a hydration system.\u003cbr\u003e• Multi-layer shell is constructed from a blend of fibreglass, carbon and Aramid fibre for the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability and durability.\u003cbr\u003e• Patented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003cbr\u003e• Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation.\u003cbr\u003e• Eject Removal System Ready: the helmet is designed to accommodate the installation of an eject removal system, which includes a removable insert on top of the EPS.\u003cbr\u003e• Removable Lining: With a 3D foam for optimum comfort, the lining features an anti-microbial treatment for long-lasting freshness.\u003cbr\u003e• The S-M7’s fit can be further customised via the Alpinestars genuine replacement cheek pads, which are available in all thicknesses, and are exchangeable between all shell sizes.\u003cbr\u003e• Lightweight: ECE 2206 - 1280g for a size medium.\u003cbr\u003e• The helmet’s shell construction utilizes a highly advanced moulding technology with a pre-preg composite construction that delivers enhanced mechanical performance with an ultra-light overall weight.\u003cbr\u003e• The result of the unique shell lay-up process employed in the S-M7 construction results in extremely effective impact protection. The S-M7 returning linear and oblique impact performance significantly exceeds current helmet regulation standard limits.\u003cbr\u003e• Specific rotational impact protection is provided by the combination of the internal shape and specific coating of the EPS liner, coupled to specially developed surface in the comfort liner. This Alpinestars Patented Specific Coating technology reduces rotational acceleration transmitted to the rider’s head: the S-M7 Helmet exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003cbr\u003e• Profiled chin bar for proven impact protection.\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479604822318,"sku":"AS-8302526-7254-XS","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"S","offer_id":51479604855086,"sku":"AS-8302526-7254-S","price":649.9,"currency_code":"NZD","in_stock":false},{"title":"M","offer_id":51479604887854,"sku":"AS-8302526-7254-M","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479604920622,"sku":"AS-8302526-7254-L","price":649.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479604953390,"sku":"AS-8302526-7254-XL","price":649.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8302526-7254.jpg?v=1773779261"},{"product_id":"s-m3-jettson-helmet-as-8302726-9277","title":"S-M3 Jettson Helmet","description":"\u003cp\u003eEngineered for MX, Enduro and off-road riding, the SM3 Helmet integrates advanced technologies and innovations designed to enhance ease of use, comfort and impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Shell Construction: This helmet features a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and lightweight. The SM3 medium weighs 1430g (ECE).\u003c\/li\u003e\n\u003cli\u003eVentilation: Maximised ventilation and high levels of heat transfer exchange thanks to 10 inlet and seven exhaust ports.\u003c\/li\u003e\n\u003cli\u003eRotational Acceleration Force Protection: Alpinestars patented low-friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts. This layer essentially acts as a slip plane to mimic the brain’s own low-friction cerebrospinal fluid, which is the body’s natural defence against oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVisor Release: Patented visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003e5 EPS inner parts with 4 densities to effectively manage volume and impact performance.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels are integrated into the helmet’s cheek pads for convenience and performance.\u003c\/li\u003e\n\u003cli\u003eComfort liner is constructed using recycled materials for a lower carbon footprint.\u003c\/li\u003e\n\u003cli\u003eThe fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as genuine spare parts in different thicknesses.\u003c\/li\u003e\n\u003cli\u003eAlpinestars has introduced a new in-house standard for the SM3 helmet to test the helmet’s chin to conditions heavier than the homologation standard, and in order to pass the Alpinestars’ new standards, the shell thickness and the structure of the helmet design itself have both been optimised on the chin area for superior impact performance.\u003c\/li\u003e\n\u003cli\u003eThe inner and outer surfaces are engineered to minimise the effects of oblique impacts.\u003c\/li\u003e\n\u003cli\u003eEquipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort.\u003c\/li\u003e\n\u003cli\u003eSoft textile chin strap is 25mm for optimal safety and rider comfort.\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings ensure a tight and secure fit.\u003c\/li\u003e\n\u003cli\u003eThe SM3 helmet conforms to both DOT certification and ECE 2206 homologation for use worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479604986158,"sku":"AS-8302726-9277-XS","price":399.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479605018926,"sku":"AS-8302726-9277-S","price":399.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479605051694,"sku":"AS-8302726-9277-M","price":399.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479605084462,"sku":"AS-8302726-9277-L","price":399.9,"currency_code":"NZD","in_stock":false},{"title":"XL","offer_id":51479605117230,"sku":"AS-8302726-9277-XL","price":399.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8302726-9277.jpg?v=1773779262"},{"product_id":"supertech-s-m10-helmet-as-8303625-3144","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eThe goal of the Alpinestars Supertech family of helmets was to create the most advanced, protective, and performance-enhancing helmets possible for riders worldwide. With the S-M10, Alpinestars’ Helmet Development team engineered the helmet to offer the perfect blend of excellent ventilation, and unsurpassed comfort, to create a helmet with the lightest weight possible, all without compromising on any other front.\u003c\/p\u003e\n\u003cp\u003eThe S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe helmet’s shell construction utilises a highly advanced moulding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fibre layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the 4 density EPS liner.\u003c\/li\u003e\n\u003cli\u003eThe result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. The S-M10 returning linear and oblique impact performance which exceeds current helmet regulation standard limits. For direct linear impacts, which is an impact at a 90-degree angle between the helmet and an object, the SM10 surpasses the new ECE 22.06 standard for 2024 by an average magnitude of 46% for regular-speed impacts. New for the ECE 22.06 standard, new requirements now include low-speed and high-speed linear impacts where the SM10 surpasses the new ECE 22.06 Peak Linear Acceleration standards by 23% and 28% respectively.\u003c\/li\u003e\n\u003cli\u003eThe S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide, providing 4 different helmet shell sizes S, M, L and XL and 6 consumer sizes from XS to XXL to ensure riders have the correct fit which not only improves comfort and reduces overall weight, but most importantly, improves the effectiveness of the helmet in an impact.\u003c\/li\u003e\n\u003cli\u003eRedesigned chin bar’s new profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a new softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound providing a reduced chance of any sort of collarbone injury.\u003c\/li\u003e\n\u003cli\u003ePatented A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head.\u003c\/li\u003e\n\u003cli\u003eUltra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts.\u003c\/li\u003e\n\u003cli\u003eNew eject technology includes the eject helmet removal system.\u003c\/li\u003e\n\u003cli\u003eLightweight ECE 1260g and 1310g with side pads and 1370g with visor extension.\u003c\/li\u003e\n\u003cli\u003eECE R 22.06\/DOT\u003c\/li\u003e\n\u003cli\u003eAnd for rotational acceleration and oblique impact performance, where impact energy comes from an angle other than a linear 90-degree, or right-angle straight impact, the S-M10 exceeds the new ECE 22.06 Peak Rotational Acceleration standard by 76%.\u003c\/li\u003e\n\u003cli\u003eRemovable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy.\u003c\/li\u003e\n\u003cli\u003eMIPS Multi-directional Impact Protection System.\u003c\/li\u003e\n\u003cli\u003eERS Emergency Visor Release and a new Visor Extension to provide protection from roost and the sun.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alpinestars","offers":[{"title":"XS","offer_id":51479605248302,"sku":"AS-8303625-3144-XS","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"S","offer_id":51479605281070,"sku":"AS-8303625-3144-S","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51479605313838,"sku":"AS-8303625-3144-M","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51479605346606,"sku":"AS-8303625-3144-L","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"XL","offer_id":51479605379374,"sku":"AS-8303625-3144-XL","price":1399.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8303625-3144.jpg?v=1773779264"},{"product_id":"supertech-s-m10-helmet-as-8305326-1674","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eSupertech S-M10 Black Hole Limited Edition Helmet Black Burst Gloss S\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51855992619310,"sku":"AS-8305326-1674-S","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51855992652078,"sku":"AS-8305326-1674-M","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51855992684846,"sku":"AS-8305326-1674-L","price":1399.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8305326-1674.jpg?v=1773779265"},{"product_id":"supertech-s-m10-helmet-as-8305426-9270","title":"Supertech S-M10 Helmet","description":"\u003cp\u003eSupertech S-M10 Records Limited Edition Helmet Multicolour Gloss S\u003c\/p\u003e","brand":"Alpinestars","offers":[{"title":"S","offer_id":51855992717614,"sku":"AS-8305426-9270-S","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"M","offer_id":51855992750382,"sku":"AS-8305426-9270-M","price":1399.9,"currency_code":"NZD","in_stock":true},{"title":"L","offer_id":51855992783150,"sku":"AS-8305426-9270-L","price":1399.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8332\/3950\/files\/as-8305426-9270.jpg?v=1773779266"}],"url":"https:\/\/store.cmgmotorcycles.co.nz\/collections\/alpinestars-mx-helmets.oembed","provider":"CMG Motorcycles","version":"1.0","type":"link"}